Plows QUIVOGNE ATLANT, ONLAND, etc.

The equipment is not available. Ask for an analog selection.

A revolving plough is an attachment designed for efficient processing and plowing of land. It differs from the classical one in the absence of a collapsed furrow and a piled ridge. It has two working parts that turn around relative to the frame by hydraulic mechanics. That is, the tractor uses one set of knives when moving along the first line, and the reverse one when entering the second line.

Such a device is usually used when plowing virgin land or dense soils, as well as slopes and hills, where not only loosening is required, but also falling off the earth in a certain direction. A reversible plow can significantly increase crop yields in the field, effectively combats entrenched weeds and improves germination. The plowed surface has no ridges or furrows, as in the case of a classic semi-mounted plowshare device, and is suitable for sowing any agricultural plants. The recommended operating speed of such a unit is no more than 10 km/h: when exceeded, the quality of plowing decreases and fuel consumption increases by 20-30%.

Advantages and disadvantages of the equipment
The main feature of the device is considered to be the ability to cultivate the soil to any required depth. The value is selected depending on which field and culture will be used. Usually, plowing is carried out to a depth of 20-27 centimeters. To set the desired value, it is enough to change the height of the support wheel. It can be located either from the rear of the mounted plow, or in the middle or closer to the tractor.

The advantages of this equipment include:

• The possibility of plowing fields without ditches and ramparts, uniform distribution of land in plowing.
• High processing speed. The tractor does not need additional manipulations during the approach to a new lane, the location of the knives is changed by a hydraulic device.
• High reliability. There is simply nothing to break in the structure, and the hydraulics are protected from damage by a durable tarpaulin sleeve.
• Smoothness and uniformity of movement due to the attachment of the semi-mounted mechanism at three points.
• Increased maneuverability of the tractor. The trailed plow does not interfere with movement, a 180-degree turn is usually done in one approach.
• The possibility of free adjustment and adjustment without the use of specialized equipment.
• Sufficient grip width, the ability to change this value mechanically. The unit can have from 2 to 18 dumps (their number depends on the tractor power and soil characteristics).

Models: ATLANT 6, ATLANT 7, ATLANT 8, ATLANT 9, ASTER/3, ASTER/3+1, ASTER/4+1, ATLANT ONLAND 6, ATLANT, ONLAND 7, ATLANT ONLAND 8.